Welcome to STAC System

List of Products

	STAC Applications
	PolyCoat Usage Guide

Surface Tolerant Anti Corrosion

The STAC Coating System is a petrolatum based, multiple-layer barrier designed to isolate all metal surfaces.

	STACprime A brush or roller applied, paste-like product to displace moisture and assure adhesion to the substrate.

	STACfill A putty-like compound used to improve the contour of angular and irregular shaped surfaces.

	STACwrap A 100% synthetic stitch-bonded fabric saturated with a petrolatum compound for a longer lasting outer barrier seal.

	STACguard A tough, pressure sensitive over wrap to provide increased strength and electrical resistance.

CONDITIONS WHERE STAC COATING SYSTEM IS A GOOD CORROSION- INHIBATING CHOICE

	Only very minimal surface preparation is possible
	Normally wet conditions unsuitable for other products like paints
	Sweating water and gas process lines
	Immersed surfaces
	Tidal areas
	Lead paint encapsulation
	Cold weather applications
	Limited access areas such as highly humid or wet process areas
	Inadequate time to apply and cure paints and other coatings
	Highly irregular surfaces such as valves, fittings, flanges and couplings
	Long-term performance is desirable
	Minimal maintenance is required with easy inspection requirements
	No equipment other than scissors and wire brush is available
	Installation permits only minimal training and can be done by unskilled labor
	Disposal of other corrosion resistant products is problematic or expensive
	Unlimited product shelf life is desirable

Product Advantages

Easy application
Cost efficient
No V.O.C.
Proven long life service
No special equipment necessary
Minimal surface preparation
Conforms to irregular surfaces

While all statements and data presented herein are believed to be accurate and reliable, they are given without expressed or implied warranty or guarantee unless otherwise stated.

Registered trademark of Central Plastics Co

Developed by Central Plastics Co's Engineers, the petrolatum based STAC coatings are non-toxic, non-flammable and non-conductive, providing superior corrosion protection for a vast array of pipes, fittings and tank applications.